 Pioneered by Loctite,
anaerobic gasketing technology has revolutionized the sealing of flanges in
the automotive industry, in the assembly of heavy equipment and in the
manufacture of various types of fluid power equipment.
Loctite® anaerobic gasketing materials remain liquid when exposed to air,
but cure when confined between mating flanges. Best suited for small gap
applications and rigid metal to metal assemblies.
| |
 Review the Product Selector Guide to compare
the available
anaerobic gasketing/flange sealing
solutions from Loctite.
|
Threadlockers |
 Invented by
Loctite Corporation as a revolutionary method to lock and seal
fasteners, Loctite® Liquid Threadlockers have found wide acceptance
in a range of applications - from delicate electronic components to
heavy construction equipment.
|
|
Review the Product Selector Guide to compare the available
threadlocking solutions from Loctite. |
REMOVABLE STRENGTH
Bolt reusability is important in maintenance and repair work.
Threadlockers with low to medium strength can be loosened
without damage to bolts with ordinary tools.
Threadlocker 242 - Removable Grade
 |
Medium strength, general purpose.
Ideal for all nut and bolt applications. Especially
suited for 1/4" or larger fasteners. Removable with
hand tools.
Applications: Machine tools, presses, pumps,
compressors, mounting bolts, gearboxes.
Approvals/Approvals/Specifications:Meets MIL-SPEC
S-46163A Type II, Grade N ; NSF/ANSI 61
2440 Threadlocker Primerless/Medium Strength
Medium strength. Ideal
for all nut and bolt applications.
Especially suited for 1/4" or larger
fasteners. Removable with hand tools.
Fixtures rapidly without primers on inactive
surfaces such as stainless steel, zinc,
black oxide, cadmium or zinc phosphate.
Applications:
Machine tools, presses, pumps, compressors,
mounting bolts, gearboxes.
Threadlocker 246 -
High Temp, Medium Strength
This
threadlocker resists oil and mild
surface contamination at continuous
temperatures to 450°F
Threadlocker 294
- High Temp, Wicking Grade
Ideally
suited for pre-assembled
fasteners. Performs well on oily
fasteners.
Threadlocker 222
Low Strength for Small Fasteners
Low
strength threadlocker. Designed
for precision metal fasteners
under 3/4". Protects threads
from rust and corrosion.
Removable with hand tools.
Available Worldwide
Applications: Set screws,
adjustment screws, calibration
screws, meters, gauges.
Threadlocker 222MS - Low
Strength meets MIL SPEC
A low
strength product that is perfect
for small fasteners up to 1/4"
diameter (6 mm), long engagement
length fasteners, and components
requiring occasional adjustment.
Applications: Set screws,
adjustment screws, calibration
screws, meters, gauges.
Approvals/Specifications:
Meets MIL-SPEC S-46163A Type II,
Grade M
Threadlocker 243 - Med Strength,
Oil Tolerant
A
removable strength,
general-purpose threadlocking
adhesive especially well suited
for fasteners between 1/4" and
3/4" diameter. Tolerant of oil
and other contamination.
Protects threads from rust and
corrosion. Cures reliably even
on stainless steel. Available
Worldwide
Applications: Machine
tools, presses, pumps,
compressors, mounting bolts,
gearboxes.
Approvals/Specifications:
NSF/ANSI 61 |
|
|
|
|
|
|
|
PERMANENT STRENGTH
 These products are
intended for products that do not require disassembly.
If disassembly is required, use localized heat and hand
tools.
Threadlocker 2760 - High Strength, Primerless
 |
High strength for locking
fasteners up to 1 1/2" (36mm). Prevents
fasteners from loosening due to shock, heat or
vibration. Protects threads from rust and
corrosion. Removable with heat and hand tools.
Fixtures rapidly without primers on inactive
surfaces such as stainless steel, zinc, black
oxide, cadmium or zinc phosphate |
|
|
Threadlocker 266 - High Temp,High Strength
 |
Fast fixturing threadlocker
resists oil and mild surface contamination at
temperatures to 450°F. Lock fasteners up to 3/4"
(20mm) in diameter |
|
|
Threadlocker 262 - Permanent Strength (up to 3/4")
 |
A permanent, high strength
product that is applied to fasteners 3/8" to 1"
(10 to 27 mm) in size. Localized heating and
hand tools are required to separate parts.
Solvents will not weaken the adhesive bond.
Available Worldwide
Applications: All fasteners that must
withstand heavy shock, vibration, or extreme
environmental or chemical conditions.
Approvals/Specifications: Meets MIL-SPEC
S-46163A Type II, Grade O ; AGRICULTURE Canada
|
|
|
Threadlocker 270 - Maximum Strength Stud Locker
 |
High strength threadlocker
for fasteners up to 3/4" (20mm). Secures large
studs and bolts. Intended for parts that do not
require disassembly. Cures fast and reliably on
most metal surfaces. Seals threads against
industrial fluids. Available Worldwide
|
|
|
Threadlocker 271 - High Strength (up to 1")
 |
High strength adhesive for
fasteners up to 1" diameter.
Approvals/Specifications:MIL-SPEC
S-46163A Type I, GRADE K ; UL
|
|
|
Threadlocker 272 - High Temperature (450°F)
 |
Hi-temp/hi-strength formula.
Suited for temperatures up to 450° F. Fast cure
on most surfaces including "as received"
fasteners. Recommended for bolts up to 1 1/2"
(36mm) in diameter. Heat and hand tools required
for disassembly. Available Worldwide
|
|
|
Threadlocker 277 - High Strength for Large Bolts
 |
High strength for locking
fasteners up to 1 1/2" (36mm). Prevents
fasteners from loosening due to shock, heat or
vibration. Protects threads from rust and
corrosion. Removable with heat and hand tools.
Available Worldwide
Approvals/Specifications:MIL-SPEC
S-46163A Type I, GRADE L
|
|
|
|
|
|
Pre-assembled Parts (Wicking Grade)
Penetrates threads by capillary action (wicks);
simplifies
preventative maintenance. Secures set screws and
other assemblies after settings
and final adjustments are completed.
Threadlocker 290
- High Strength, Wicking Grade
 |
A low viscosity threadlocking liquid,
290 wicks along the threads of pre-assembled fasteners
to secure them in place. Penetrates threads by capillary
action; simplifies preventive maintenance. Available
Worldwide
Applications: Preassembled fasteners,
instrumentation screws, electrical connectors,
carburetors.
Approvals/Specifications: Meets MIL-SPEC S-46163A
Type III, Grade R ; NSF/ANSI 61 |
|
|
|
 Products
for Plastic Fasteners For use
in place of
anaerobic threadlockers
on most thermoplastics (ABS, PVC, etc.).
ASSURE
Threadlocker 425
 |
A low strength, fast surface curing threadlocker for
plastic and metal fasteners. Can be pre- or
post-applied.
Applications: Plastic and metal fasteners.
|
|
|
|
| Call
1-800-323-5158 for more information or Email:
gluguru@on-hand.com |
|
|
|
Glu
Guru™ Tech Center 1850 South
Elmhurst Road Mount Prospect, Il 60056
