Dexter Hysol® Epoxy Adhesive Selector Guide
Click on Product for Data Sheet
Product
Number		 Description Color Form Work Life Handling Time
(Room Temp)		 Tensile Lap
Shear (PSI @ 77F)		 Max Service Temp F
0151 General Purpose
Clear Epoxy 		 Clear Light Paste 50 min 6-8 hrs 1850 160
143 Impact Resistant Opaque  Paste 50 min 6-8 hrs 4300 200
1C General Purpose
gap filling , very low out  		 White Non-sag paste 20 min 3-4 hrs 1750 300
1C-LV Low Viscosity 1C White Paste 20 min 3-4 hrs 2100 275
608 Fast Cure Epoxy, Clear Clear Low Viscosity 5 min 5-10 min 2000 130
609 Fast Cure Epoxy ultra clear Clear Low Viscosity 5 min 5-10 min 2800 180
615 Fast Cure Epoxy, Gap Filling Blue Paste 10 min 10-15 min 2500 130
9412 Low Viscosity
potting epoxy, high peel		 Pink Liquid 60 min 8-9 hrs 4000 160
9412 Black Low Viscosity
potting epoxy, high peel, black		 Black Liquid 60 min 8-9 hrs 4000 160
9430 High strength, high peel epoxy Cream Light Paste 40 min 6-8 hrs 4700 180
9432NA One part, high temp epoxy Grey Non-sag N/A 30 min @ 300F 3800 400
9433 High strength, high peel, low viscosity Cream Self leveling paste 30 min 3-4 hrs 3800 180
9434 High temp aluminum filled Grey Paste 60 min 6-8 hrs 3000 400
9436 High temp, self leveling Green Liquid 45 min 6-8 hrs 2100 350
9437 High temp epoxy Grey Paste 60 min 8-12 hrs 3000 300
9459 One part epoxy Beige Liquid N/A 30 min@300F 3500 350
9460 General Purpose High Performance Grey Non-sag paste 30 min 6-8 hrs 3500 225
9460F Fast cure version of 9460 Grey Non-sag paste 20 min 3-4 hrs 3800 225
9462 Low viscosity 9460 Grey Non-sag paste 50 min 6-8 hrs 3500 225
9739 High temp epoxy Black Heavy paste 90 min 3-4 hrs 2500 375

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com