|
BULK HOT MELT DISPENSERS
NEW! Quattro™
Drop -In Replacement Unit for Nordson®
models
Dynamini™Dynagun™ System
Dynamelt™ S Series System
Dynatec PUR Bulk Hot Melt
Dispenser
Automated Dispense Heads
Spotwheel/Printwheel
Applicator
NEW!! ITW Dynatec introduces the
DDS Series, a new dual gear pump drive adhesive supply unit. The DDS Series
offers an exceptional value in a two drive/two gear pump hot-melt adhesive
supply unit. This new unit is available in both the 48 and 100 pound hopper
capacity. Melt rates are available from 50 to 130 pounds per hour (melt rate
various with adhesive type). Two gear pump drives permits the
individual control of both adhesive pressure and volume. Examples for
individual adhesive pressure and volume are the up and down apply applicators
for high speed carton sealing applications and for operating multi DGII hand
applicators. The Dynacontrol control panel on the DDS Series is
compatible to the Dynamelt 'S' series adhesive supply units
CLICK HERE FOR DYNAMELT DDS SERIES
BROCHURE
Dynamini™Dynagun™ System
FREE HOT MELT ADHESIVES!
SPECIAL OFFER
LIMITED TIME ONLY
Purchase
a
Dynamini™Dynagun™
Bulk Hot Melt Dispenser
and receive 5 FREE cases of BOSTIK hot melt
adhesives.
Call Jim at 1-800-323-5158 or Email Jim at
gluguru@on-hand.com
 | Melt-On-Demand Hopper Grid
extends adhesive life performance |
|
| Digital Temperature Controller with
platinum sensor accuracy |
|
| Available in electric or pneumatic/electric
operating configuration |
|
| Compact, lightweight full swivelDYNAGUN™ provides
application
flexibility |
|
| 7 year Melt-On-Demand warranty |
|
| Independent temperature control of the
hopper, hose, and hand applicator permit
the precise metering of the adhesive |
Melt-On-Demand
Hopper Grid extends adhesive life performance
Adhesive charring is minimized
 MEMORY
CARD
Memory card being inserted in to
Dyna Control Panel. Memory card retains important application data.
Can serve as a Contol Panel Operator
Access Key.
DYNAMINI™ Adhesive Supply Unit
Hopper Capacity: 4.5 kg/10.0lb
Maximum Melt Rate: 8.1 kg/18.0 lbs/hour
Maximum Piston Pump Rate: 54.5 kg/120.0 lb/hour
Maximum Gear Pump Rate: 25 kg/55.0 lb/hour
Maximum Number Hoses: 2
Maximum Number Applicators: 2
Electrical requirements:
110/115 volts, 20 amps
240 volts, 30 amps
The DynaminiTM Adhesive Supply Unit
A Cost Effective Solution to your Adhesive Needs
Upgrade the Efficiency of your hot melt system
with
an ITW Dynatec Unit
Dynamelt™ S Series Adhesive
Supply System
[Click on photo for larger view]
 |
 | Melt-On-Demand Hopper Grid extends adhesive life and performance. |
| Self-diagnostic Dynacontrol P.I.D. digital temperature controller with
platinum sensor accuracy. |
| Seven hopper sizes and melt rates selections fitted with either a piston or
gear pump. |
| Easily removable access covers completely exposes for easy maintenance. |
|
|
MODEL |
S05 |
S10 |
S10G |
S22 |
S22G |
S45 |
S45G |
|
HOPPER
CAPACITY
kg/lbs |
5/10 |
9/32 |
9/20 |
22/48 |
22/48 |
45/100 |
45/100 |
|
MELT RATE
Varies with
adhesive |
10/23 |
11/23 |
19/42 |
23/50 |
41/90 |
23/50 |
41/90 |
Call 1-800-323-5158 for more information
To
Dispenser Menu
| 
Glu
Guru™ Tech Center 940 Telser Road Lake
Zurich, IL 60047 
