STATOMIX ME & MS STATIC MIXERS...When used with meter mix                equipment, provide a low cost solution for two-component mixing. The mixer                element is molded of polyacetal to withstand the higher pressures of meter mix                machines. Available with support washers to prevent the elements from                extruding out the end of the housing when working with high pressure                applications. The outlet of the staic mixer is stepped, therefore, bead size can                be increased by cutting the tip. Suitable for all types of meter mix dispense                systems on the market. MC CARTRIDGE MIXERS. ..Developed for the MIXPAC 200 and MIXPAC                400 systems. The mixer element was designed to provide less resistance while                dispensing. This minimizes operator fatigue. The MC Cartridge mixer can be                used with all large cartridge systems. They come in a wide variety of sizes and                will mix any 2-part material including epoxies, silicones, urethanes, acrylics and                polyesters. MA STATIC MIXERS. ..Features simple twist-lock mounting. The MA mixers'                first element automatically aligns itself precisely with the dividing wall of the                MIXPAC 50cartridge, seperating Part A and Part B. As a result of this                patented design, the MA mixer prevents curing at the interface of the                cartridge. Available in a wide variety of sizes and will mix any 2-part material                including epoxies, silicones, urethanes, acrylics and polyesters. Also are used                for a wide range of low pressure meter mix applications. IN-LINE ALL STEEL MIXERS ...Especially suited for mixing two-component                synthetic resin systems. These durable stainless steel mixers consist of                alternating left and right hand helical elements which are brazed the entire                length of the tubular mixing housing. It needs to be cleaned immediatelyafter                use. IN-LINE STEEL/FIBERGLASS MIXERS...Developed as a low -cost                alternative for mixing two-component synthetic resins. The mixing elements                are made of a high-grade, solvent resistant plastic. A transverse rod at the                outlet end of the zinc-plated steel housing supports the elements. The     low-cost allows for easy replacement and avoids unproductive cleaning should a                complete hardening occur within the mixer. RETAINING NUTS      A low cost solution to high cost aluminum threaded fasteners.    Made of high strength Nylon to endure the high pressure of meter mix machines. Polypropylene retaing nuts are available for cartridge assemblies.        SHROUDS AT HIGHER OPERATING PRESSURE AND FOR TEMPERATURES ABOVE 104f  (40c)..SHROUDS SHOULD BE USED AT ALL TIMES.   If a shroud is not used at higher pressures, the   polypropylene housing can expand and allow the parts of the components to streamline down the housing wall,                                 preventing an optimal mixture . LUER LOCK.The STATOMIX plastic disposable mixers are available with Luer Lock fittings and needles for a variety of                             applications.,                For further assistance or a catalog showing complete specifications on                these STATOMIX MOTIONLESS MIXERS and/or for more information                Contact: 1-800-323-5158