|
To Dispenser Menu Page
To Home Page To Hot
Melt Page Order Direct
NEW LOCTITE-HYSOL HOT MELT APPLICATORS
Manual
Pneumatic
Bench Mount Kit
Pneumatic Applicators
The Loctite-Hysol® 175 AIR
Hot Melt Applicator
The Hysol® 175-AIR is an industrial grade,
hand-held pneumatic hot melt applicator used for dispensing 1.75” diameter EVA sticks.
The operating temperature of the unit is set at195°C.
The dispense rate is controlled by the
air pressure, and the timing is controlled by the
trigger mechanism. Pneumatically powered
dispensing reduces operator fatigue. A high
adhesive dispense rate and large adhesive
loading capacity are the trademarks of this
applicator. A dispenser stand is included as part
of the system.
This new model replaces the Hysol 4010, 4000,
4100. Also available in higher temperature as the Hysol175-Air-HT
OPERATION MANUAL
DATA SHEET
BUY |
The LoctiteHysol® 175-AIR-HT
is an industrial grade,
hand-held pneumatic hot melt applicator used
for dispensing 1.75” diameter polyamide sticks.
The operating temperature of the unit is set at
215°C. The dispense rate is
controlled by the
air pressure, and the timing is controlled by the
trigger mechanism. Pneumatically powered
dispensing reduces operator fatigue. A high
adhesive dispense rate and large adhesive
loading capacity are the trademarks of this
applicator. A dispenser stand is included as part
of the system.
OPERATION MANUAL
DATA SHEET
BUY |
The Loctite-Hysol® 175-SPRAY
is an industrial grade,
hand-held pneumatic hot melt applicator used
for dispensing 1.75” diameter EVA sticks. The
operating temperature of the unit is set at
180°C. By using the air adjustment control, the
dispense pattern can be varied from a narrow to
a wide spiral spray pattern. The dispense
quantity and timing are manually controlled with
the trigger mechanism. Pneumatically powered
dispensing reduces operator fatigue. A
dispenser stand is included as part of the system.
This new model replaces the Hysol 4210
Spray Tool.
Also available in higher temperature as the Hysol 175-Spray-HT
OPERATION MANUAL
DATA SHEET
BUY
|
|
|
|
Loctite-Hysol® 175-SPRAY-HT is an industrial
grade, hand-held pneumatic hot melt applicator
used for dispensing 1.75” diameter polyamide
sticks. The operating temperature of the unit is set at 195°C. By using the air
adjustment control, the dispense pattern can be varied from a narrow to a wide spiral
spray pattern. The dispense quantity and timing are manually
controlled with the trigger mechanism.
Pneumatically powered dispensing reduces
operator fatigue. A dispenser stand is included
as part of the system.
OPERATION MANUAL
DATA SHEET
BUY |
Hot Melt BENCHMOUNT Kit Item 98042
Hot Melt Pneumatic Timer Item 98043
Call 1-800-323-5158 to BUY
To Dispenser Menu Page
To Home Page To Hot
Melt Page Order Direct
|
The Glu
Guru™
Adhesive Tech Center
