You may print this page for your file

Hysol ® 7902
Hot Melt Adhesive


Description
Hysol 7902 is a low viscosity, polyamide hot melt with a high softening point used extensively for potting and encapsulating in the electronics industry.

Typical Properties
                                                                                                                    Test Method
Softening Point, F                                 330                                              ASTM E 28
Viscosity @ 400 F,  centipoise              600                                            *ASTM D 3236
Specific Gravity @ RT, g/cc                  .99                                               ASTM D 792
Heat Resistance, 2lb, F                          284                                              ASTM D 4498
Application Temperature, F                 400-450
* Brookfield RVT,                                Spindle SC4-27


Performance Characteristics
Tensile Lap Shear Strength, psi                                                                ASTM D 3163
Pine                                                         380
Noryl                                                       300

Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations. There are many excellent bulk hot melt applicators available.


Packaging
Pellets in 40lb. cartons                      Polyshot in 25lb. pails.

Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call 800.323.5158 now and let us help you with your adhesive needs.

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com