You may print this page for your file

Hysol ® 7901
Hot Melt Adhesive

Description
Dexter Hysol 7901 is low viscosity, high melting polyamide with a sharp melting point and high resistance used extensively for potting and encapsulating in the electronics industry. .

Typical Properties
                           Test Method
Softening Point, °F330ASTM E 28-67
Viscosity @ 350°F, centipoise750                                *Thermosel
Heat Resistance, °F                                                300                                 HTPSK-1
Specific Gravity, /cc                                               0.99                                ASTM D 1475
Film Tensile, psi                                                      260                                ASTM D 638-68
Film Elongation %                                                  80                                  ASTM D 638-68
*Brookfield RVT, Spindle SC4-27


Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations.  There are many excellent bulk hot melt applicators available.

FDA Status
Ingredients in this product are listed under Food and Drug Administration CFR 175.105, Adhesives.

Availability
Available forms include pellets and shaped forms for hand held applicators

Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call 800.323.5158 now and let us help you with your adhesive needs.

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com