You may print this page for your file

Hysol ® 7802
Hot Melt Adhesive

FONT FACE='Garamond' SIZE=2 COLOR=#000000>
Description
Hysol 7802 is a tough, flexible high performance polyamide hot melt with excellent adhesion to many difficult to bond substrates.  It shows excellent performance over a broad temperature range.

Typical Properties                              
                                                                                                                       Test Method
Softening Point, F                                            276                                      ASTM E28-67
Viscosity @ 350F centipoise                            14,500                               *Thermosel
Specific Gravity @ RT, g/cc1                           .03                                        ASTM 1475
Tensile Strength, PSI                                        600                                      ASTM D638-68
Elongation, %                                                  450                                      ASTM D638-68
*Brookfield RVT, Spindle SC4-27

Performance Characteristics
Adhesive Tensile, PSI                                                                                    ASTM 897-72
PVC/PVC                                                           160
ABS/ABS                                                            80
Nylon/Nylon                                                      90
Polycarbonate/Polycarbonate                            100
Shear Strength, PSI                                                                                       Hysol HTPSK-2
Stainless Steel                                                      1340
PVC                                                                     900
ABS                                                                     400
Heat Resistance, F                                               240                                    Hysol HTPSK-1


*Electrical Properties
Dielectric Strength, V/mil                                  650                                    ASTM D-149
Dielectric Constant, K                                        3.6                                     MIL-1-16923
Dissipation Factor, D                                       .135                                     ASTM D-150
Volume Resistivity, ohm-cm (pv)                    2.2x1014                            ASTM D-257
Surface Resistivity, ohm-cm (sv)                       2.8x1014                            ASTM D-257


Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations.  There are many excellent bulk hot melt applicators available.  

Availability
Pellets and  shaped forms for hand held applicators.

Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call 800.323.5158 now and let us help you with your adhesive needs.

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com