You may print this page for your file

Hysol ® 6500
Hot Melt Adhesive

Description
Hysol 6500 is a medium setting EVA based adhesive used extensively in general purpose applications. It exhibits excellent  adhesion to wood and many plastics such as nylon, polycarbonate , PVC, polystyrene, ABS and acrylic.

Typical Properties
                                                                                                                        Test Method
Softening Point, °F                                          228                                         ASTM E28-67
Viscosity @ 400°F, centipoise                         9200                                      *Thermosel
Specific Gravity @ RT, g/cc                             0.96                                       ASTM 1475
Tensile Strength, PSI                                       250                                        ASTM D638-68
Heat Resistance, °F                                          150                                        Hysol HTPSK-1
Open Time, (sec)                                             25
*Brookfield RVT, Spindle SC4-27


Application
Hysol offers a complete line of reliable, portable, hand held applicators specifically designed to accurately dispense all shaped hot melt formulations.  There are many excellent bulk applicators available.  Your local Hysol salesman will be happy to help you with your selection.

Availability
Available in pellets and shaped forms for hand held applicators.

FDA Status
Ingredients in this product are listed under the Food and Drug Administration CFR 175.105, Adhesives

Technical Consultation Service
Our technical staff and representative are ready to assist in solving any special bonding requirements. You are invited to take advantage of our extensive experience, laboratory services and trained field service staff. Call 800.323.5158 now and let us help you with your adhesive needs.

DISCLAIMER: The information supplied in this document is for guidance only and should not be construed as a warranty. All implied warranties
are expressly disclaimed. Including without limitation any warranty of merchantability and fitness for use: All users of the materials are responsible
for assuring that it is suitable for their needs, environment and use. All data is subject to change as Dexter deems appropriate. 

Users should review the Material Safety Data Sheet (MSDS) and product label for the material to determine possible health hazards, appropriate
engineering controls and precautions to be observed in using the material. Copies of the MSDS and label are available upon request. 

For more information or to order contact the Glu Guru™ at 1-800-323-5158
or Email mike@on-hand.com