|
Adhesives
Acrylics
Aerosols
Anaerobics
Cyanoacrylates
Epoxies
Glue Dots
Hot Melt Adhesives
Methacrylates
Mold Releases
Sealants
Silicones
Solvent-Free
Structural Adhesives
Urethanes
UV Adhesives
Applicators
Accessories
Dispensers
Dual Dispensing
Epoxy
Hot Melt Dispensers
Hot Melt Bulk
Hot Melt Hoses
Hot Melt Rolls
Hot Melt Parts Nozzles/Parts
Motionless Mixers
Robots
Structural
Demonstrations
Bar Code Printer
Box
Printer
Equipment
Drum Unloader
Slot Die Applicator
Cold Glue Applicator
Fiberized Spray Pattern Controllers
Bulk Meters
Drum Meters
Adhesive Feeders
Metering Station
Supply Units
Service
Plan
Applications
Carton Sealing
Electronic Materials
Encapsulants
Green Adhesives
Magnet Bonding
Marine Adhesives
Medical Device
One Part Adhesives
Packaging
Potting
Robotic
Solvent-Free Spray
Space Age Adhesive
Surfacing Adhesives
Transportation
Woodworking
Literature
About Bonding
Data Sheets
Journals
Line Card
MSDS
Tech Menu
Meeting Customer expectations
and requirements is the main objective
of ISO 9001:2008
WHAT DO YOU THINK OF US?
We would appreciate your help so that we can
provide you with the very best in services. Your response to any of our emloyees
will help us address the areas of performance needing improvement.
ENTER HERE
| |
ARALDITE 2015 EPOXY
Composites bonding…with Araldite 2015 epoxy. It’s a
tough, resilient paste that is ideal for use on thermoset composites of all
types, particularly on fiberglass-reinforced epoxies. The same adhesive works
well on metals and combinations of the dissimilar materials. If you haven’t been
promoting this great adhesive, start today!
The thixotropic, gap-filling adhesive can be applied up to a
0.39-in. (10-mm) thickness. It has a 35-minute gel time and attains handling
strength after only four hours at room temperature. Once cured, Araldite 2015
produces joints with high shear strength, good peel strength and good resistance
to chemicals, heat, water and impact.
Like other Araldite 2000 epoxies, the adhesive is supplied in
50 and 200ml cartridges as well as working packs and pails.
Key Handling Properties
 | Gel time: 35 minutes
|
| Mix ratio: 1:1 pbv
|
| Easy to apply with a spatula |
Other Special Features
| Araldite 2015 is beige
|
| It has a lap shear strength of 3,200 psi at room temperature and 1,050 psi
after a postcure
|
| Roller peel is 25 pli |
|
Typical Properties of Araldite 2015 Epoxy |
|
Product |
|
Work
Life |
|
Mixed
Viscosity,
cps @ 77ºF* |
|
Mix
Ratio,
pbv |
|
Min. Cure Time,
Hrs. @ 77ºF*
(Min. @ 212ºF*) |
|
Peel
Strength,
pli |
|
Lap Shear
Strength, psi
@ 77ºF* |
|
Max. Service
Temperature,
ºF (ºC) |
|
Araldite 2015 |
|
35 min. |
|
Paste |
|
1:1 |
|
10 (7) |
|
25 |
|
3,200 (1,050**) |
|
176 (80) |
|
*
77ºF=25ºC; 212ºF=100ºC
** After a postcure
Back to Araldite Menu |
|
 |
|
IMPORTANT:
The following supercedes Buyer’s documents. SELLER MAKES NO
REPRESENTATION OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No statements
herein are to be construed as inducements to infringe any relevant
patent. |
|
Under
no circumstances shall Seller be liable for incidental, consequential or
indirect damages for alleged negligence, breach of warranty, strict
liability, tort or contract arising in connection with the product(s).
Buyer’s sole remedy and Seller’s sole liability for any claims shall be
Buyer’s purchase price. Data and results are based on controlled or |
|
lab
work and must be confirmed by Buyer by testing for its intended
conditions of use. The products described herein have not been tested
for, and are therefore not recommended for, uses for which prolonged
contact with mucous membranes, abraded skin, or blood is intended; or
for uses for which implantation within the human body is intended. |
|
|
|
|
|
|
|
The Glu
Guru™
Adhesive Tech Center
