Hot Melt Adhesives
Hot Melt Dispensers
Hot Melt Bulk
Hot Melt Hoses
Hot Melt Rolls
Hot Melt Parts Nozzles/Parts
Bar Code Printer
Slot Die Applicator
Cold Glue Applicator
Fiberized Spray Pattern Controllers
One Part Adhesives
Space Age Adhesive
Meeting Customer expectations
and requirements is the main objective
of ISO 9001:2008
WHAT DO YOU THINK OF US?
We would appreciate your help so that we can
provide you with the very best in services. Your response to any of our emloyees
will help us address the areas of performance needing improvement.
Vantico’s Araldite 2012 structural epoxy like Araldite
2011 is an ideal metal-bonding material…but sets fast for repairs and
other projects where time is critical. One of our distributors reports that
the product is also great for fast, reliable and flexible bonds on
thermoplastics. They’ve found that Araldite 2012 epoxy outperforms other
fast-setting epoxies and many polyurethanes for really tough applications.
Araldite® 2012 Resilient, Rapid Epoxy
Araldite 2012 is easy-to-handle with a medium viscosity and convenient
packaging (50- and 200-ml cartridges) for fast, clean and waste-free bonding
projects. In addition to forming durable joints on metals, the epoxy
produces tough bonds on plastics, rubbers, glass, ceramic and wood. The
system sets fast with a four-minute gel time; it can be handled after just
20 minutes at room temperature.
Primary Benefits and Features
• 1:1 mix ratio
• Easy-to-mix and dispense, opaque liquid
• Four-minute work life
• Rapid cure that can be accelerated with heat
• Good shear and peel strength
• Tougher than other rapid-setting epoxies for durable bonds
Adhesive Tech Center
Typical Properties of Araldite 2012 Epoxy
Mixed Viscosity, cps @ 77°F*
Mix Ratio, pbv
Min. Cure Time, @77°F* (212°F*)
Lap Shear Strength, psi @77°F*(140°F*)
Max. Service Temperature, °F (°C)
60 (2) min.
* 77°F=25°C; 140°F=60°C; 212°F=100°C
Back to Araldite Menu
The following supercedes Buyer’s documents. SELLER MAKES NO REPRESENTATION
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. No statements herein are to be construed as
inducements to infringe any relevant patent.
Under no circumstances shall Seller be liable for incidental,
consequential or indirect damages for alleged negligence, breach of
warranty, strict liability, tort or contract arising in connection with the
product(s). Buyer’s sole remedy and Seller’s sole liability for any claims
shall be Buyer’s purchase price. Data and results are based on controlled or
lab work and must be confirmed by Buyer by testing for its
intended conditions of use. The products described herein have not been
tested for, and are therefore not recommended for, uses for which prolonged
contact with mucous membranes, abraded skin, or blood is intended; or for
uses for which implantation within the human body is intended.
Vantico A&T US Inc.