Hot Melt Adhesives
Hot Melt Dispensers
Hot Melt Bulk
Hot Melt Hoses
Hot Melt Rolls
Hot Melt Parts Nozzles/Parts
Bar Code Printer
Slot Die Applicator
Cold Glue Applicator
Fiberized Spray Pattern Controllers
One Part Adhesives
Space Age Adhesive
Meeting Customer expectations
and requirements is the main objective
of ISO 9001:2008
WHAT DO YOU THINK OF US?
We would appreciate your help so that we can
provide you with the very best in services. Your response to any of our emloyees
will help us address the areas of performance needing improvement.
Araldite® 2011 Toughened, Long Work Life
Multi-purpose Araldite 2011 epoxy produces durable, high-strength bonds
between metal, rigid plastic, ceramic and wood substrates. The
medium-viscosity adhesive is easy to apply by spatula, stiff brush or
meter-mixing equipment. It cures at a variety of temperatures from 68°F
(20°C) to 356°F (180°C). Among the specific advantages of the epoxy are:
Benefits and Features
• Long open time of two hours
• 1:1 mix ratio
• High shear and peel strength
• Good resistance to static and dynamic loads and vibration
• Electrically insulating
Other Special Features
• Araldite 2011 is a creamy, amber liquid
• It’s supplied in low-waste,
easy-to-handle 50-ml and 200-ml cartridges.
Typical Properties of Araldite 2011 Epoxy
Mixed Viscosity, cps @ 77°F*
Mix Ratio, pbv
Min. Cure Time, @77°F* (212°F*)
Lap Shear Strength, psi @77°F*(140°F*)
Max. Service Temperature, °F (°C)
12 (10) min.
* 77°F=25°C; 140°F=60°C; 212°F=100°C
The following supercedes Buyer’s documents. SELLER MAKES NO REPRESENTATION
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. No statements herein are to be construed as
inducements to infringe any relevant patent.
Under no circumstances shall Seller be liable for incidental,
consequential or indirect damages for alleged negligence, breach of
warranty, strict liability, tort or contract arising in connection with the
product(s). Buyer’s sole remedy and Seller’s sole liability for any claims
shall be Buyer’s purchase price. Data and results are based on controlled or
lab work and must be confirmed by Buyer by testing for its
intended conditions of use. The products described herein have not been
tested for, and are therefore not recommended for, uses for which prolonged
contact with mucous membranes, abraded skin, or blood is intended; or for
uses for which implantation within the human body is intended.
Vantico A&T US Inc.