ADHESIVE FOCUS NEWS
JOURNAL
The
Glu Guru welcomes you to
Cost Cutting Information helpful to your
Production and Packaging needs
Production and Packaging needs
A savings of $25.00 or $50.00 on each gun purchased depending on the model!
POWER HOT MELT
APPLICATORS
TEC
3200
POWER ADHESIVES TEC 3200 Manual
HOT MELT GLUE GUN
Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$324.49 SALE $299.49 To order call 1-800-323-5158 and mention Sale Code No.25
The TEC 3200 just needs to be plugged in and used, no need for an airline to be hooked up. This gun is great for product assembly, packaging, sealing and electrical potting and encapsulation. The TEC 3200 can be left on for long periods of time without having to worry about the glue overheating, this gun will actually switch to a lower temperature and automatically return to full operating temperature when used. There is a 400 watt stainless steel heater cartridge for a quick 4 minute warm-up time and capable of dispensing up to 8 lbs. of glue per hour while only weighing in at 2.5 lbs ADVANCED FEATURES: Safety Nozzle Shroud , External Thumb Wheel for easy adjustment of the plunger release, Indicator Lights for power-on and stand-by, Optional Plug in Temperature Modules and 1 year TEC 6100 warranty.
TEC 6100
POWER ADHESIVES TEC 6100 Pneumatic
HOT MELT
GLUE GUN
Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$670.00 SALE $620.00 To order call 1-800-323-5158 and mention Sale Code No.50.
The TEC 6100 is a highly effcient dispenser using twin 250 watt stainless steel heaters, which provides a quick 5 minute warm-up time and weighs in at only 3 lbs. This dispenser is capable of dispensing up to 11 lbs. of glue per hour for the most demanding of applications. The ADVANCED FEATURES:TEC 6100 features a Fully Enclosed Heater Housing with silicon rubber nozzle shroud, A special Non-stick Coated Piston for easy loading and to reduce glue meltback and also has an Audible and Visual Indicator for reloading to minimize downtime. The gun ships complete with an Integral Dispenser Stand, Suspension Ring, instruction booklet and 1 year TEC 3200 warranty.
TEC 6300
POWER
ADHESIVES TEC 6300 Pneumatic
SPRAY
HOT MELT GLUE GUN
Uses 1 3/4" x 1 3/4" Hot Melt Cartridges
$733.25 SALE $683.250 To order call 1-800-323-5158 and mention Sale Code No.51
The TEC 6300 is a unique economical spray applicator. It only takes 10 minutes to warm up with a 500 watt heated melt chamber. The adhesive output is controlled by adjusting the air pressure and the spray pattern is controlled by using the rear mounted spray control knob. This gun weighs in at only 3 lbs. and can dispense up to 10 lbs. of glue per hour. It is the perfect gun for covering areas up to about 10 square feet at a time. This gun can also be used on heat sensitive substrates such as expanded polystyrene and other kinds of plastic foams. ADVANCED FEATURES: Spray Nozzle for wide area coverage, Spray Adjustment Knob for both right and left handed operators, Easy to Load with large 43mm glue cartrudges, Fully Enclosed Heater Housing and Power On Warning Light for extra safety and 1 year TEC 6300 warranty.
Order by phone at 1-800-323-5158
To get the sale price on each applicator ordered, use the appropriate coupon numbers shown above.
Sale begins August 10 and ends August 31st. No limit on number of applicators ordered!
| VISIT OUR WEBSITE AT www.gluguru.com One Stop Source for Adhesives, Dispensers, Accessories
© Copyright 2010
On-Hand Adhesives, Inc All rights
reserved |